CHCNAV EasyNAV EMG100 Master Package – Easy-to-Use 3D Machine Control for Excavators

The CHCNAV EasyNAV EMG100 Master Package is a compact and easy-to-use 3D machine control system designed for excavators, combining precise GNSS positioning, machine attitude information, and a clear user interface into one integrated solution.

The EMG100 is specifically designed for construction sites where centimeter-level accuracy is desired without the complexity of traditional 3D machine control systems. The system allows the operator to monitor excavation depth, height, and slope in real-time, and to create necessary surface models and references directly within the system.

Easy 3D Machine Control

The EasyNAV EMG100 is designed for quick deployment and easy daily use. According to CHCNAV, the system's basic functions can be learned in approximately 30 minutes, and installation and calibration can be quickly performed by one person.

The clear user interface displays the necessary height, slope, and position information directly to the operator in the cabin.

Key Benefits

• Easy-to-use 3D machine control for excavators
• GNSS-based centimeter-level positioning
• Accuracy up to ±3 cm
• 10.1-inch touch screen
• Two GNSS antennas
• Real-time machine attitude tracking
• 100 Hz tilt sensors
• Supports GNSS RTK networks and base stations
• On-site surface design without CAD expertise
• Definition of AB reference lines directly on site
• Suitable for a wide range of excavators and work tool configurations
• Specifically designed for fast and efficient excavation work

Precise Excavation with Centimeter-Level Accuracy

The EMG100 utilizes full GNSS positioning and advanced machine excavation algorithms. CHCNAV states the system's maximum positioning accuracy is ±3 cm. In addition to GNSS positioning, the system uses tilt sensors to determine the attitude of the machine and work tool configuration.

With this information, the operator receives real-time data on the bucket's position and can precisely control excavation according to the planned height or slope.

Design on Site Without CAD Software

One of the key features of the EasyNAV EMG100 is the ability to perform on-site surface design directly within the system without prior CAD expertise.

The operator can, for example, define reference surfaces and AB lines on the construction site and use them to guide excavation work. This makes the system particularly practical for sites where a ready 3D design model is not available.

Clear 10.1-inch Display

The EMG100 system features a 10.1-inch Android-based touch screen. The large display clearly presents machine attitude, height, and slope information, as well as operational guidance, within the operator's field of vision. The display is IP65 protected.

The user interface is designed to be as clear as possible, allowing both experienced and novice operators to quickly get to grips with the system.

Suitable for Diverse Excavation Works

The EasyNAV EMG100 is suitable for, for example:

• leveling excavation
• foundation excavation
• precise finish grading
• cable trenches
• pipe and utility works
• ditch and drainage structure excavation
• slope construction
• road construction
• ground leveling
• small and medium-sized earthworks projects

The system supports various excavator work tool configurations and is designed for use with a swing boom, tilt bucket, and side-shifting boom.

Easy RTK Positioning Connection

The EMG100 can be connected to GNSS RTK networks and third-party base stations. The system features Wi-Fi, Bluetooth, and 4G LTE connectivity, as well as support for an external radio modem.

This allows the system to be adapted to different site conditions and positioning solutions.

Robust Construction for Site Use

The components of the EasyNAV EMG100 are designed for the demanding conditions of earthworks. The display unit has an IP65 protection rating, and the tilt sensors are IP69K rated. The GNSS antennas are IP68 protected.

The system is designed to withstand dust, moisture, vibration, and varying weather conditions on the construction site.

Technical Specifications

• CHCNAV EasyNAV EMG100 Master Package
• 3D machine control system for excavators
• GNSS: full GNSS support
• Positioning accuracy: up to ±3 cm
• Display: 10.1", Android, touch screen
• Display protection: IP65
• Tilt sensors: 100 Hz
• Tilt sensor protection: IP69K
• GNSS antennas: 2 pcs
• GNSS antenna protection: IP68
• Wireless connectivity: Wi-Fi and Bluetooth
• Mobile connectivity: 4G LTE
• External radio modem support
• Interfaces: CAN and RS232
• GNSS RTK network support
• Supports on-site surface design
• Definition of AB reference lines
• Real-time machine attitude tracking
• Suitable for various excavators and work tool configurations

What Mittatukku Offers?

• Finnish language deployment
• User training
• Technical support
• Machine control system installation and deployment
• Installation of GNSS and tilt sensors
• System calibration and adjustment
• Site-specific deployment
• Maintenance and calibration services
• Financing and leasing solutions