{"title":"Machine Control","description":"","products":[{"product_id":"aa6-lidar-1","title":"AA6 Lidar","description":"\u003ch1\u003e\u003cspan\u003eCHCNAV AlphaAir 6 (AA6) – For Long-Range Aerial LiDAR Mapping\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe CHCNAV AlphaAir 6 (AA6) is a powerful aerial LiDAR surveying system that combines long-range laser scanning, precise inertial navigation, and high-resolution imaging. The AA6 is specifically designed for UAV-based mapping and challenging terrains where efficient and accurate 3D data collection is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eLong Range – Efficient Aerial Mapping\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AA6\u003c\/span\u003e\u003cspan\u003e LiDAR system offers a measurement range of up to 2,100 meters and is typically suitable for flight altitudes of 100–600 meters. The long range and powerful laser enable rapid mapping of large areas, even in varied terrain with high relief.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Benefits\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eLiDAR range up to 2,100 m\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUp to 2,000,000 laser pulses per second\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e90° field of view\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUp to 16 returns\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e500 Hz IMU\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cspan\u003eIMU\u003c\/span\u003e\u003cspan\u003e bias stability 0.3°\/h\u003c\/span\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e25 MP \/ 100 MP camera\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e4\/3\" CMOS sensor\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS support for all major satellite systems\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePositioning accuracy of less than 5 cm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e512 GB storage\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWeight only 1.35 kg\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eIP64 protection\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eEfficient LiDAR Scanning\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AA6\u003c\/span\u003e\u003cspan\u003e next-generation laser system enables a point rate of up to 2,000,000 points per second. Fifth-generation real-time waveform processing enhances point cloud density and data coverage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eCHCNAV\u003c\/span\u003e\u003cspan\u003e states that the performance is up to 2,000,000 points\/s and approximately 460 points\/m² at an altitude of 120 meters. At an altitude of 400 meters, the system produces up to 300,000 points\/s and approximately 20 points\/m².\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eAccurate Positioning for Demanding Flight Missions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AA6\u003c\/span\u003e\u003cspan\u003e's 500 Hz inertial navigation system and 0.3°\/h bias stability support accurate trajectory determination and the creation of high-quality point clouds. The system is designed to perform efficiently even when mapping high-relief and challenging terrains.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe GNSS system supports all major satellite positioning systems, and the manufacturer states a positioning accuracy of less than 5 cm in both horizontal and vertical directions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eHigh-Resolution Imaging\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AA6\u003c\/span\u003e\u003cspan\u003e features a 4\/3-inch CMOS sensor, enabling 25-megapixel or 100-megapixel imaging modes. The high-resolution image data complements the LiDAR point cloud, allowing for more precise documentation of targets and the production of photogrammetric data.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eLightweight Design – More Flight Time\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWeighing only 1.35 kg, the AA6 is designed for efficient UAV operation. On the CHCNAV X500 platform, the system allows for up to 50 minutes of flight time and covers an area of approximately 15 km² in a single mission, according to the manufacturer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AA6\u003c\/span\u003e\u003cspan\u003e's open interfaces also enable integration with multi-rotor and fixed-wing UAV platforms from other manufacturers, as well as manned aircraft.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSuitable for Diverse Professional Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AA6 is suitable for:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eland surveying and aerial mapping\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003etopographic mapping\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eforest mapping\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eroad and route mapping\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003epower line and infrastructure inspections\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003emine and quarry mapping\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003emeasurement of high-relief terrains\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e3D point cloud production\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003edocumentation of large areas\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUAV-based LiDAR measurement projects\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eLiDAR range up to 2,100 m\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eScanning speed up to 2,000,000 pulses\/s\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e90° field of view\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUp to 16 returns\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e500 Hz IMU\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cspan\u003eIMU\u003c\/span\u003e\u003cspan\u003e bias stability 0.3°\/h\u003c\/span\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS support for all major satellite systems\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePositioning accuracy \u0026lt; 5 cm (H\/V)\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e25 MP \/ 100 MP camera\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e4\/3\" CMOS sensor\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e74° camera field of view\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e12 mm focal length\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e512 GB storage\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWeight 1.35 kg\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eIP64 protection\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eOperating temperature -20 °C – +50 °C\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTypical flight altitude 100–600 m AGL\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eWhat Mittatukku Offers\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eFinnish language deployment\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUser training\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTechnical support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUAV and LiDAR measurement system deployment\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMeasurement and processing software deployment\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMaintenance and calibration services\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eFinancing and leasing solutions\u003cbr\u003e\u003cbr\u003ePDF Link: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1000\/5381\/1583\/files\/AA6_DS_EN.pdf?v=1787125240\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Specifications AA6\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"CHCNAV","offers":[{"title":"Default Title","offer_id":58158487798143,"sku":null,"price":15000.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5381\/1583\/files\/chcnav-alphaair-6-flagship-airborne-lidar-system.png?v=1786434124"},{"product_id":"mcnav-tx73-excavator-system-kit-1","title":"MCNAV TX73 Excavator System KIT","description":"\u003ch1\u003e\u003cspan\u003eCHCNAV MCNAV TX73 – 3D Excavator Control System\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe CHCNAV MCNAV TX73 is a powerful 3D excavator control system that combines precise GNSS positioning, robust IMU sensors, and real-time 3D guidance. The TX73 accurately determines the position of the bucket tip and displays the planned surface directly in the cabin, allowing excavation work to be performed to the target depth without continuous traditional measurement.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eExcavate precisely – exactly according to the plan\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWith the TX73, the operator sees the bucket's position and the planned surface in real-time. 3D guidance reduces excessive excavation, post-measurements, and rework, and speeds up work, especially on demanding sites.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe system is suitable for trenches, foundation excavation, slope construction, and road and infrastructure projects, for example.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Benefits\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003ePrecise 3D GNSS excavator control\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eReal-time bucket tip positioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS and IMU technology in one system\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eAccuracy up to 1 cm (H) \/ 1.5 cm (V)\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eLarge 10.1\" Android touchscreen\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e3D CAD data visualization\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSupports various buckets and tilt-rotator configurations\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCompatible with Engcon and Steelwrist tilt-rotators, for example\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e4G LTE, Wi-Fi, and Bluetooth\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e410–470 MHz UHF modem\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eIP69K-rated tilt sensor\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTwo IP68-protected GNSS antennas\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eOTA remote updates\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMCSite cloud service support\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eReal-time 3D guidance on site\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe TX73 displays the design model and bucket position in real-time on the cabin screen. The operator can monitor excavation depth, height, and slope directly during operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe 3D CAD engine enables clear visualization of design data, allowing work to be done directly based on the digital model.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePrecise positioning for demanding excavation work\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe TX73's precise GNSS positioning and IMU sensors determine the bucket tip's position in various working attitudes. The system's stated positioning accuracy is at best 1 cm horizontally and 1.5 cm vertically.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePrecise positioning reduces over-excavation and unnecessary material movement, and helps achieve the planned surface already during the first pass.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCAD data directly in the cabin\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIn the TX73's 3D view, plans can be brought directly to site use. The operator sees the planned surface and working area without each work phase requiring a separate marking on the ground.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe solution is particularly suitable for model-based infrastructure, road, foundation, and earthmoving projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCompatible with various attachment configurations\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe TX73 can be integrated into various excavators and attachment configurations. The system also supports tilt-rotator configurations and, for example, Engcon and Steelwrist tilt-rotators.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis allows the same machine control solution to be used versatilely in various excavation and finishing tasks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDesigned for demanding site conditions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe TX73 components are designed to withstand the demanding conditions of a worksite. The tilt sensor is IP69K-protected, and the GNSS antennas are IP68-protected. The 10.1-inch Android display is IP65-rated.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eOTA updates and the MCSite cloud service enable system updates, data transfer, and remote support even during worksite operations.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSuitable for versatile earthmoving\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe TX73 is suitable for example:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003etrench excavation\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003efoundation excavation\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eroad and infrastructure construction\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eslope and embankment construction\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003epipe and network installations\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esite elevation and slope control\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eprecise material exchange\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003emodel-based earthmoving\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003efinishing excavation\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esite 3D guidance\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003e3D excavator control\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eFull GNSS support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePositioning accuracy up to 1 cm (H) \/ 1.5 cm (V)\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e10.1\" Android display\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDisplay IP65\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e100 Hz tilt sensor\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTilt sensor IP69K\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTwo GNSS antennas\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS antennas IP68\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e4G LTE\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWi-Fi\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eBluetooth\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUHF modem 410–470 MHz, reception\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCAN interface\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eRS232 interface\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e3D CAD visualization\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTilt-rotator support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eOTA updates\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMCSite cloud service\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eWhat does Mittatukku offer?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eFinnish language commissioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUser training\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTechnical support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eExcavator control system installation and commissioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMeasurement and machine control software commissioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMaintenance and calibration services\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eFinancing and leasing solutions\u003cbr\u003e\u003cbr\u003ePDF Link:\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1000\/5381\/1583\/files\/TX73_DS-EN_2.pdf?v=1787125767\" target=\"_blank\" rel=\"noopener\"\u003e Technical specifications TX73\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"CHCNAV","offers":[{"title":"Default Title","offer_id":58158571127167,"sku":null,"price":18000.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5381\/1583\/files\/TX73-Group-Photo-scaled.png?v=1786609103"},{"product_id":"is300-imu-sensor-1","title":"IS300 IMU Sensor","description":"\u003ch1\u003e\u003cspan\u003eCHCNAV IS300 IMU Sensor – Precise Tilt and Motion Sensor for Machine Control\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe CHCNAV IS300 is a precise IMU sensor designed for machine control systems, measuring machine and implement movement, position, and tilt in real time. The IS300 helps determine the exact location and orientation of the tool, enabling precise 3D machine control in demanding earthmoving projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eAccurate Information on Machine Position\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWith the IS300, the machine control system can monitor the movements of the machine and implement in real time. Accurate tilt and motion information allows for precise positioning of the bucket, blade, or other tool even when the machine is in motion.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Benefits\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003ePrecise IMU sensor for machine control\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eReal-time tilt and motion measurement\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSupports 3D machine control\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSuitable for excavators and other heavy equipment\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eFast and stable position data updates\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDurable construction for job site use\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDesigned for demanding environmental conditions\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCompatible with CHCNAV machine control solutions\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eAccurate Tilt Compensation\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe IS300 measures the position of the machine and implement in real time. IMU technology allows for accounting for machine movements and tilts, enabling the machine control system to calculate the precise tool position even on uneven ground.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis facilitates precise control of excavation depth, height, and slope, for example.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDesigned for Machine Control\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe IS300 can be integrated as part of the CHCNAV 3D machine control solution. The position data generated by the sensor is combined with GNSS positioning and the machine's geometric data, allowing the system to determine the tool's position relative to the design model.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe solution is particularly suitable for excavators and other earthmoving machines where the precise tool position is an important part of machine control.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDurable Construction for Job Site Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe IS300 is designed for professional machine control applications and continuous operation in demanding environments. The sensor's construction is built to withstand machine vibration, movement, and varying job site conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSuitable for Versatile Machine Control\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe IS300 is suitable for:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003e3D machine control for excavators\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eexcavation depth control\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ebuilding slopes and gradients\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003efoundation excavation\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eroad and infrastructure construction\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003epipe and network work\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eprecise finish grading\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eimplement position monitoring\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003emachine control systems for earthmoving equipment\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eIMU motion and tilt sensor\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eReal-time position data measurement\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eConstruction designed for machine control use\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCombination of GNSS and IMU data\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e3D machine control support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSuitable for measuring position data of implement configurations\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDesigned for demanding job site use\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCompatible with CHCNAV MCNAV machine control solutions\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eWhat does Mittatukku offer?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eFinnish-language commissioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUser training\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTechnical support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eInstallation and commissioning of the machine control system\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSensor calibration and system adjustment\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMaintenance and calibration services\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eFinancing and leasing solutions\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"CHCNAV","offers":[{"title":"Default Title","offer_id":58158617198975,"sku":null,"price":600.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5381\/1583\/files\/Nayttokuva2026-08-11113013.png?v=1786437038"},{"product_id":"receivers-mc300-1","title":"Receivers MC300","description":"\u003ch1\u003e\u003cspan\u003eCHCNAV MC300 GNSS Receiver – Precise Positioning for Machine Control\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe CHCNAV MC300 is a high-performance GNSS receiver designed for machine control systems, providing accurate and reliable positioning data for 3D machine control of earthmoving equipment. The MC300 operates as part of the CHCNAV MCNAV system, combining precise GNSS positioning with the attitude information of the machine and its implement configuration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe MC300 enables precise real-time determination of the machine's location and helps the machine control system calculate the tool's position relative to the design model.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePrecise GNSS Positioning for Machine Control\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe MC300's\u003c\/span\u003e\u003cspan\u003e function is to provide accurate real-time positioning data to the machine control system. RTK technology allows for centimeter-level positioning, which is crucial in precise earthmoving.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIn the MCNAV system, the MC300 works in conjunction with the IS300 IMU sensor and a GNSS antenna. With this information, the system can determine the position of the machine and the tool even when the machine is in motion.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Benefits\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eAccurate GNSS receiver for machine control\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eRTK positioning with centimeter-level accuracy\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eReal-time positioning data updates\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDesigned for the CHCNAV MCNAV machine control system\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCompatible with the IS300 IMU sensor\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eEnables precise determination of bucket and tool position\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSuitable for demanding earthmoving applications\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eIndustrial-grade construction and reliable operation\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eIP67 protection rating\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCompact design suitable for machine installation\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003ePrecise RTK Positioning\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe MC300 utilizes RTK positioning to determine the precise location of the machine. According to the technical specifications of the CHCNAV\u003c\/span\u003e\u003cspan\u003e MCNAV TX73 system, RTK positioning accuracy is 8 mm + 1 ppm RMS horizontally and 15 mm + 1 ppm RMS vertically.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePrecise positioning data forms the basis for 3D machine control. When GNSS location is combined with the machine's geometric data and the attitude information from the IS300 IMU sensor, the system can determine, for example, the position of an excavator's bucket relative to the design model.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePart of the MCNAV 3D Machine Control System\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe MC300 is designed as part of the CHCNAV\u003c\/span\u003e\u003cspan\u003e MCNAV machine control solution. In the complete system, the receiver works in conjunction with the MCPad300 display, AT315 GNSS antenna, and IS300 IMU sensor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe cooperation of these components enables real-time monitoring of the machine's position and attitude, as well as precise calculation of the tool's location.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eAccuracy for Excavation Work\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThanks to precise GNSS positioning, the MC300 helps the operator work according to the digital design model. The machine control system can show the operator where the bucket is located in relation to the target elevation, designed surface, or slope.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis facilitates, for example, the control of excavation depth and precise finish grading, and reduces the need for continuous separate measurement.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDesigned for Demanding Construction Site Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe MC300 is designed for the demands of machine control and continuous construction site use. The receiver's IP67 protection rating helps protect the device from dust and water in construction site conditions. The receiver's dimensions are 215 × 154 × 58 mm and its weight is 1.11 kg.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eCHCNAV states that the MC300\u003c\/span\u003e\u003cspan\u003e is an industrial-grade receiver designed to withstand the demanding use of machine control.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSuitable for Versatile Machine Control\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe MC300 is suitable for, for example:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003e3D machine control for excavators\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS-based machine positioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eexcavation depth control\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003efoundation excavation\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003econstruction of slopes and grades\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eroad and infrastructure construction\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003epipe and network installations\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eprecise finish grading\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eworking according to digital design models\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003epositioning of earthmoving equipment\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eCHCNAV MC300 GNSS Receiver\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS receiver for machine control applications\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eRTK accuracy horizontal: 8 mm + 1 ppm RMS\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eRTK accuracy vertical: 15 mm + 1 ppm RMS\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDimensions: 215 × 154 × 58 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWeight: 1.11 kg\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eOperating temperature: -30 °C – +60 °C\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eStorage temperature: -30 °C – +70 °C\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eIngress protection rating: IP67\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDesigned for the CHCNAV MCNAV machine control system\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eWhat Does Mittatukku Offer?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eFinnish-language commissioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUser training\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTechnical support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMachine control system installation and commissioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS receiver installation and configuration\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSensor calibration and system adjustment\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMaintenance and calibration services\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eFinancing and leasing solutions\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"CHCNAV","offers":[{"title":"Default Title","offer_id":58158649049471,"sku":null,"price":1800.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5381\/1583\/files\/MC300Receiver_1.png?v=1787293957"},{"product_id":"antenna-gnss-at315-1","title":"Antenna - GNSS AT315","description":"\u003ch1\u003e\u003cspan\u003eCHCNAV AT315 GNSS Antenna – Reliable GNSS Signal Reception for Machine Control\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe CHCNAV AT315 is a GNSS antenna designed for the MCNAV machine control system, tasked with receiving precise satellite positioning data for determining machine location. The AT315 works in conjunction with the CHCNAV MC300 GNSS receiver, forming a critical component of the 3D machine control positioning solution.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eReliable GNSS signal reception is essential for accurate machine control. The AT315 provides the MC300 receiver with a high-quality satellite signal, which is utilized in determining the position of the machine and its implements.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePrecise GNSS signal reception\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AT315 is specifically designed for the needs of the MCNAV machine control system. The antenna receives GNSS satellite signals, which the MC300 receiver processes into precise positioning data.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWhen GNSS positioning is combined with the attitude data from the IS300 IMU sensor and the machine's geometric data, the MCNAV system can determine the precise location of the implement in real-time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Benefits\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS antenna for 3D machine control\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDesigned for the CHCNAV MCNAV system\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCompatible with the MC300 GNSS receiver\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eReliable satellite signal reception\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSuitable for demanding earthmoving applications\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCompact design for machine installation\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eHigh gain\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWide operating temperature range\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eIP68 protection rating\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDesigned to withstand machine control vibrations and shocks\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003ePart of a precise positioning chain\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AT315 operates in conjunction with the MC300 GNSS receiver. The antenna receives GNSS signals transmitted by satellites and relays them to the receiver for positioning calculations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIn the MCNAV system, GNSS positioning, together with the IS300 IMU sensor, forms the basis for determining the precise position of the machine and its implement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis allows the operator to monitor, for example, the position of the bucket relative to the design model and control work with greater precision.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDesigned for 3D machine control\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AT315 is part of the CHCNAV\u003c\/span\u003e\u003cspan\u003e TX73 3D machine control solution. In this system, the AT315 GNSS antenna, MC300 receiver, and IS300 IMU sensor form an integrated unit that allows the machine's position and attitude to be determined in real-time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe solution is particularly suitable for excavators, where precise implement positioning is an important part of efficient and high-quality work.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDurable construction for job site use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AT315 is designed for the demanding operating conditions of earthmoving machinery. The antenna's IP68 protection helps shield it from dust and water, and the device is designed to operate over a wide temperature range. According to CHCNAV\u003c\/span\u003e\u003cspan\u003e TX73 documentation, the AT315's\u003c\/span\u003e\u003cspan\u003e operating temperature range is -40 °C to +75 °C.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe antenna is compact and suitable for machine installation, allowing it to be integrated as part of the overall machine control system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSuitable for versatile machine control\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AT315 is suitable for, for example:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003e3D machine control for excavators\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS-based machine positioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eExcavation depth control\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eExcavation of foundations and building bases\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eConstruction of slopes and grades\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eRoad and infrastructure construction\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePipe and network work\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePrecise finish excavation\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWorking according to digital design models\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCHCNAV MCNAV machine control systems\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eCHCNAV AT315 GNSS Antenna\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDesigned for the MCNAV machine control system\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCompatible with the MC300 GNSS receiver\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDimensions: 40 × 140 × 55 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWeight: 0.7 kg\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eOperating voltage: 3.3–12 V DC\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGain: 40 ± 2 dB\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eNoise figure: ≤ 2 dB\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eOperating temperature: -40 °C to +75 °C\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eStorage temperature: -50 °C to +85 °C\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eProtection rating: IP68\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eShock resistance: 40 G \/ 11 ms\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eVibration resistance: 7.7 Grms, 10–1000 Hz\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eWhat does Mittatukku offer?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eFinnish-language commissioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUser training\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTechnical support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMachine control system installation and commissioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS antenna installation and configuration\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSensor calibration and system adjustment\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMaintenance and calibration services\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eFinancing and leasing solutions\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"CHCNAV","offers":[{"title":"Default Title","offer_id":58159217475967,"sku":null,"price":250.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5381\/1583\/files\/AT315Antenna_1.png?v=1787294111"},{"product_id":"easynav-emg100-master-package-1","title":"EasyNAV EMG100 master package","description":"\u003ch1\u003e\u003cspan\u003eCHCNAV EasyNAV EMG100 Master Package – Easy-to-Use 3D Machine Control for Excavators\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe CHCNAV EasyNAV EMG100 Master Package is a compact and easy-to-use 3D machine control system designed for excavators, combining precise GNSS positioning, machine attitude information, and a clear user interface into one integrated solution.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe EMG100 is specifically designed for construction sites where centimeter-level accuracy is desired without the complexity of traditional 3D machine control systems. The system allows the operator to monitor excavation depth, height, and slope in real-time, and to create necessary surface models and references directly within the system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eEasy 3D Machine Control\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe EasyNAV EMG100 is designed for quick deployment and easy daily use. According to CHCNAV, the system's basic functions can be learned in approximately 30 minutes, and installation and calibration can be quickly performed by one person.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe clear user interface displays the necessary height, slope, and position information directly to the operator in the cabin.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Benefits\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eEasy-to-use 3D machine control for excavators\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS-based centimeter-level positioning\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eAccuracy up to ±3 cm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e10.1-inch touch screen\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTwo GNSS antennas\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eReal-time machine attitude tracking\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e100 Hz tilt sensors\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSupports GNSS RTK networks and base stations\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eOn-site surface design without CAD expertise\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDefinition of AB reference lines directly on site\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSuitable for a wide range of excavators and work tool configurations\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSpecifically designed for fast and efficient excavation work\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003ePrecise Excavation with Centimeter-Level Accuracy\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe EMG100 utilizes full GNSS positioning and advanced machine excavation algorithms. CHCNAV states the system's maximum positioning accuracy is ±3 cm. In addition to GNSS positioning, the system uses tilt sensors to determine the attitude of the machine and work tool configuration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWith this information, the operator receives real-time data on the bucket's position and can precisely control excavation according to the planned height or slope.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDesign on Site Without CAD Software\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eOne of the key features of the EasyNAV EMG100 is the ability to perform on-site surface design directly within the system without prior CAD expertise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe operator can, for example, define reference surfaces and AB lines on the construction site and use them to guide excavation work. This makes the system particularly practical for sites where a ready 3D design model is not available.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eClear 10.1-inch Display\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe EMG100 system features a 10.1-inch Android-based touch screen. The large display clearly presents machine attitude, height, and slope information, as well as operational guidance, within the operator's field of vision. The display is IP65 protected.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe user interface is designed to be as clear as possible, allowing both experienced and novice operators to quickly get to grips with the system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSuitable for Diverse Excavation Works\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe EasyNAV EMG100 is suitable for, for example:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eleveling excavation\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003efoundation excavation\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eprecise finish grading\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ecable trenches\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003epipe and utility works\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003editch and drainage structure excavation\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eslope construction\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eroad construction\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eground leveling\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esmall and medium-sized earthworks projects\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe system supports various excavator work tool configurations and is designed for use with a swing boom, tilt bucket, and side-shifting boom.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eEasy RTK Positioning Connection\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe EMG100 can be connected to GNSS RTK networks and third-party base stations. The system features Wi-Fi, Bluetooth, and 4G LTE connectivity, as well as support for an external radio modem.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis allows the system to be adapted to different site conditions and positioning solutions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eRobust Construction for Site Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe components of the EasyNAV EMG100 are designed for the demanding conditions of earthworks. The display unit has an IP65 protection rating, and the tilt sensors are IP69K rated. The GNSS antennas are IP68 protected.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe system is designed to withstand dust, moisture, vibration, and varying weather conditions on the construction site.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eCHCNAV EasyNAV EMG100 Master Package\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e3D machine control system for excavators\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS: full GNSS support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePositioning accuracy: up to ±3 cm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDisplay: 10.1\", Android, touch screen\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDisplay protection: IP65\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTilt sensors: 100 Hz\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTilt sensor protection: IP69K\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS antennas: 2 pcs\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS antenna protection: IP68\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWireless connectivity: Wi-Fi and Bluetooth\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMobile connectivity: 4G LTE\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eExternal radio modem support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eInterfaces: CAN and RS232\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eGNSS RTK network support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSupports on-site surface design\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDefinition of AB reference lines\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eReal-time machine attitude tracking\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSuitable for various excavators and work tool configurations\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eWhat Mittatukku Offers?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003eFinnish language deployment\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eUser training\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eTechnical support\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMachine control system installation and deployment\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eInstallation of GNSS and tilt sensors\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSystem calibration and adjustment\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSite-specific deployment\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMaintenance and calibration services\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eFinancing and leasing solutions\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"CHCNAV","offers":[{"title":"Default Title","offer_id":58159220326783,"sku":null,"price":5500.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5381\/1583\/files\/easynav-emg-100-3d-excavator-system-chcnav.png?v=1786438661"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5381\/1583\/collections\/ChatGPT_Image_May_22_2026_03_54_36_PM.png?v=1787046430","url":"https:\/\/mittatukku.fi\/en\/collections\/koneohjaus.oembed","provider":"MittaTukku","version":"1.0","type":"link"}